 |
|
|
|
TC06-20TEH/01,200W DC48V Peltier Air Conditioner, Applied In Outdoor Telecom Cabinet
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
200W DC48V TEC AIR CONDITIONER
Model: TC06-20TEH/01
1. Introduction
The TC06-20TEH/01 TEC air conditioner is a full automation temperature control device. It uses intelligent controller to control the whole system of the air conditioner. According to the variation of environment temperature, the intelligent controller can automatically detect and operate . The product is widely applied in telecom cabinet, small and medium sized telecom room, UPS room, outdoor base station room, etc.
2. Technical Specs
2.1 General Description
The TC06-20TEH/01 TEC air conditioner consists of 6 parts: peltier module (including sealing and insulation material), cold end radiator, hot end radiator, cold end fan, hot end fan, monitoring module. When power supply is connected to the TEC, one side of the peltier conduct cooling, and the other side of the peltier conduct heating, the cool (heat) from which will diffuse to the surrounding environment through cold (hot) end radiators and fans. The cold end radiator and cod end fan constitute the inside circulation for cooling the cabinet internal environment, while the hot end radiator and hot end fan constitute outside circulation for heat radiation to the external environment.
Diagram 1: TC06-20TEH/01 structure diagram (top view)
Both the inside circulation and outside circulation air ducts adopt air inlet through middle fans and air outlet through radiators at the two sides.
Diagram 2: TC06-20TEH/01 inside circulation and outside circulation air ventilation
2.2 System Parameters
|
Model No. |
TC06-20TEH/01 |
|
Cooling Method |
air to air |
|
Cooling Object |
air |
|
Cooling Object Contact Medium |
air |
|
Cooling Effective Power |
200W |
|
Input Voltage |
DC48V (43V～58V) |
|
Cooling Stable Current |
7.0±5%A |
|
Installation Mode |
side |
|
Noise |
58dB |
|
MTBF |
70000h |
|
Size (LxWxH) |
400x180x203mm |
|
Weight |
7.5Kg |
|
Environmental Performance |
working environmental temperature |
-40°C ~ 60°C |
|
|
storage working temperature |
-50°C ~ 70°C |
|
|
working humidity |
≤95% |
|
Thermal Performance |
rated cooling capacity |
200W |
|
|
heating input power |
300W |
|
Electrical Performance |
rated input current |
6.8A |
|
|
rated input power |
330W |
|
|
input voltage |
DC48V |
2.3 Dimension
Diagram 3: TC06-20TEH/01 dimension
3. Control
3.1 Application
TC06-20TEH/01 air conditioner uses a universal intelligent controller ET724, which is controlled by highly integrated STC single chip microcomputer. The controller, with good performance, easy and convenient installation and set, is widely applied in small and medium sized telecom room, UPS room, outdoor base station room, etc.
3.2 Technical Parameter
(1)Three digit seven segment digital tube displays measured temperature and set temperature.
(2)Temperature measurement accuracy: 0.1 °C ; display accuracy:0.1 °C.
(3)Intelligently choose cooling mode or heating mode.
(4)With protective direct ventilation function.
(5)Power Supply: DC48V.
(6)Power Consumption: ≤5W.
(7)Working Environment: -30°C~70°C; <90%RH.
(8)Installation method: guide rail,hanging.
(9)Size (L×W×H): 150mm×190mm×45mm
3.3 Operating Instruction
ET724 uses user-friendly interfaces, which can be operated easily. All the operations can be realized with four buttons. The following is the control board diagram:
Diagram 4: control board diagram
3.3.1 Buttons
PgDn:page down button, confirm button.
Press once and release the button, select next parameter;
A long press on the button, enter or exit parameter mode.
▲:At parameter mode: increasing parameter revision. At operating mode: press this button to enter manual cooling mode (manual cooling preparation mode, with cooling indicator flashing), start manual cooling together with PgUp button.
▼:At parameter mode: decreasing parameter revision. At operating mode: press this button to enter manual heating mode (manual heating preparation mode, with heating indicator flashing), start manual heating together with PgUp button.
PgUp: At parameter mode:dispaly parameter name and parameter value. At operating mode: if previously it is manual cooling preparation mode, press this button to enter manual cooling mode; if previously it is manual heating preparation mode, press this button to enter manual heating mode.
3.3.2 Operating Instruction
(1) Operating Mode:
The mode is normal working mode. 3 digits LED display measured temperature and set temperature in turn. Six LED meanings:
PV lamp on: the digital window displays measured temperature;
SV lamp on: the digital window displays set temperature; at cooling mode, it shows cooling start temperature; at heating mode, it shows heating set temperature;
Col lamp on: the current output is cooling; flashing means manual preparation mode;
Heat lamp on: the current output is heating; flashing means manual preparation mode;
TEC alarm on: TEC failure, fan failure, or temperature sensor failure;
Temp alarm on: measured temperature is higher than set upper limit or lower than set lower limit.
At operating mode, a long press on PgDn to enter parameter mode, or manual cooling/heating mode. Please refer to 3.3.1.
(2)Parameter Mode:
At this mode, one can observe or revise the revisable parameters. Refer to 3.3.3 parameter instruction.
At parameter mode: one can manually shift parameter no.(Pn) or parameter value display (shift with PgUp button).
3.3.3 Parameters
|
Parameter No. |
Parameter Name |
Initial Value |
Remark |
|
P00 |
FSV |
|
current feedback value, unit: A |
|
P01 |
Fr1 |
|
fan rotating speed 1, per second |
|
P02 |
Fr2 |
|
fan rotating speed 2, per second |
|
P03 |
LOC |
0 |
password parameter, LOC=55, accessible to the following parameters; LOC=77, recover parameter setting when devivery. |
|
P04 |
colTa |
28.0 |
cooling start temperature |
|
P05 |
colTb |
2.0 |
cooling control return difference |
|
P06 |
hotTa |
10.0 |
heating start temperature |
|
P07 |
hotTb |
2.0 |
heating control return difference |
|
P08 |
ZFanTa |
35.0 |
straight ventilation start temperature |
|
P09 |
ZFanTb |
2.0 |
straight ventilation control return difference |
|
P10 |
tecAL |
0.5 |
TEC current lower limit |
|
P11 |
tecAH |
20.0 |
TEC current upper limit |
|
P12 |
TAL |
5.0 |
internal temperature alarm lower limit |
|
P13 |
TAH |
45.0 |
internal temperature alarm upper limit |
|
P14 |
BT |
0.0 |
temperature deviation correction |
|
P15 |
fanEN |
0 |
allow fan fault judgement |
|
P16 |
tecEN |
1 |
allow TEC fault judgement |
|
P17 |
ADR |
1 |
communication address |
|
P18 |
BAUD |
2 |
baud rate:0~3, (2400~19200BPS) |
|
P19 |
inOH |
100 |
inside fan speed limit |
|
P20 |
outOH |
100 |
outside fan speed limit |
|
P21 |
fsvX |
1.0 |
current feedback correction coefficient (amplifying coefficient) |
|
P22 |
pqTa |
80 |
hydrogen exhaust cycle (hour); auto hydrogen exhaust every 30 minutes after starting cooling; can press pqTa to define hydrogen exhaust cycle. |
|
P23 |
pqTb |
2 |
hydrogen exhaust time length(minute) |
4. Mainboard Wiring Diagram
Diagram 5: mainboard interface diagram
J1: keyboard;
J2: temperature sensor input,1 - 5V, 2 - T, 3 - GND;
J3: Prog;
JD1: DC48V input, 1- 48V+, 2 - 48V- ;
JD2: internal and external fans power supply, 1 - +48V, 2 - 0V;
JD3: TEC air conditioner power supply;
When cooling,1 - +48V, 2 - 0V; When heating, 1 - 0V, 2 - 48V;
JD4: straight ventilation output, 1 - +48V, 2 - 0V;
JD5: 1, 2 - system alarm output (dry contact, close alarm);
3, 4 - temperature alarm output( dry contact, close alarm);
JD6: fans control interface:
Internal fan control, 1 - Yellow (control output), 2 - White (feedback input);
External fan control, 3—Yellow (control output), 4 -White(feedback input);
JD7: RS485 communication interface:
1 - B-, 2 - A+,3 - SGND.
5. Mainboard Wiring Picture
Diagram 6: mainboard wiring picture
Contact Details
Other Products
-
300W Peltier Air Conditioner / Thermoelectric Cooler / TEC Air Conditioner
-
Environment-friendly 200W TEC Air Conditioner With Peltier Module, Small Size Light Weight
-
DC48V 100W Thermoelectric Cooler / Peltier Air Conditioner For Outdoor Telecom Cabinet, IP55
-
400W DC48V high efficiency TEC air conditioner for telecom cabinet air conditioner
-
TC06-40TEH/01,400W 48V Peltier Thermoelectric Cooler AC,For Outdoor Telecom Cabinet/Room
-
TC06-35TEH/01,350W 48V Peltier Air Conditioner,For Outdoor Telecom Cabinet/ Base Station