Payment & Shipping Terms:
|Material:||Stainless Steel||External Dimension:||H×W×D 1550×1300×650mm|
|Structure:||Sandwich Structure, Double Wall With Heat Insulation||Cabinet Layout:||Two Compartments|
|Heat Insulation:||PEF And EPS||Cooling::||AC220V Air Conditioner And DC48V Fans|
|Coating:||Anti-smoke Anti-corrosion Outdoor Powder Coating||Solar Radiation Intensity:||1120 ×（1±5%）W/m2|
|Air Pressure:||62kpa ~ 101kpa (similar To 0m ~ 5000m Altitude)||Working Temperature:||-40°C ~ +55°C|
The ET656080 Outdoor Telecom Cabinet is mainly used in wireless communication base station:
(1) 4G system
(2) Communication/network integrated service
(3) Access/transmission switching station
(4) Emergency communication/transmission
(5) The cabinet is suitable for outdoor environment, such as road side, park, building roof, mountain area, flat ground, etc. The cabinet can be installed with base station equipments, power supply equipments, batteries, temperature control equipments, transmission equipments and other equipments, or the cabinet can reserve installation space and heat exchange capacity for the above equipments, providing reliable mechanical and environmental protection for normal operation of the internal equipments.
(1)Standard compartment temperature control
Multiple temperature control modes optional
Energy saving and high efficiency
Compartment type design
Two compartments / multiple compartments
High compatibility, high integration
Supporting multiple equipments, good appearance
(4) Fast deployed
Can be assembled,easy for transportation
Modular assembly, short installation time
Suitable for road side station and building top station. After being fixed on the ground, the cabinet will start to work.
|Structure||Dimension||External Dimension: H×W×D 1550×1300×650mm|
|Equipment Installation Method||Battery shelf|
|Door||With two front doors, and special lock for outdoor cabinet (support padlock)|
|Material||Stainless steel SU304|
|Heat Insulation||There are heat insulation between inner wall and outer wall. The insulation material is PEF and EPS.|
|Temperature Control||Cooling||AC220V air conditioner and DC48V fans|
|Lighting||LED lamp||48V LED lamps (immovable), with protective circuit breaker|
|Temperature||Temperature||Working Temperature: -40°C ~ +55°C|
|Storage Temperature: -50°C ~ + 70°C|
|Transport Temperature: -50°C ~ +70°C|
|Humidity||Relative Humidity||5% ~ 100%|
|Pressure||Air Pressure||62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)|
|Radiation Intensity||Solar Radiation Intensity||1120 ×(1±5%)W/m2|
(2) Accessories List
|1||Outdoor Telecom Cabinet||1||Set||
(1) External Dimension: H×W×D 1550×1300×650mm
(2) 2 compartments: used for installing battery
(3) With two front doors, and special lock for outdoor cabinet (support padlock) ; (4) Material
(4.1) Cabinet left side, right side and back: sandwich structure panel, outer plate: 0.5mm galvanized steel, inner plate: 0.5mm galvanized steel, insulation: 45mm flame retarded EPS.
(4.2) Cabinet door and base: outer plate: 1.5mm galvanized steel , inner plate: 0.8mm galvanized steel, insulation: 40mm PEF.
(4.3) Cabinet roof: sandwich structure panel (outer plate: 0.5mm galvanized steel, inner plate: 0.5mm galvanized steel, insulation: 45mm flame retarded EPS. ) + 1.0mm galvanized steel.
Cooling capacity: 500W, Power supply: AC220V, 50HZ;
|3||Auxiliary Direct Ventilation Fans||1||PC||12038 DC48V|
|4||LED Lamp Sensor||2||PC||Used for controlling LED lamp on/off|
4.1 The cabinet is used in outdoor environment., it can be dustproof, sunproof and rainproof.
4.2 Including -48VDC illumination lamp.
4.3 The cabinet cooling uses air conditioner and direct ventilation fan.
4.4 The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. At the bottom of the cabinet, there are entrance holes individually for power cable, signal cable and optical cable.
4.5 All the cables, sealing and heat insulation used in the cabinet are made from flame retardant materials.
4.6 The cabinet uses assembled structure, easy for installation.
4.7 The cabinet includes 19” standard installation rack.
4.8 Theft proof design
●Inside installation, inside fixing, no outer screws
● Anti-theft three point lock
● Inside door hinges, multiple protection
● Embedded cabinet door, theft proof
The cabinet is two bay outdoor battery cabinet. It is made from stainless steel, double wall with heat insulation. The cabinet cooling use air conditioner and fans, to ensure the equipments operate normally at stable temperature range, so as to make the service life of the equipments much longer and their performance more stable.
5.1 Door lock theft proof design
(1) Damage resistance of the theft proof lock meets GA/T 73-1994 “Mechanical Anti-theft Lock” class B requirement, supporting padlock.
(2)Three point lock
5.2 Connection and Fastening
(1)Use anti-loose threaded connection as structure and bearer connection. Anchor bolt for fixing cabinet use hot dip galvanized bolts.
(2)Door hinges use inner hinge mode.
5.3 Appearance and Surface Treatment
Cabinet surface coating is outdoor special powder coating, with white gray color (PANTONE 428C). The coating complies with GB/T 3181-2008 requirement.
5.4 LED lamp and LED lamp sensor are installed on the top.