 |
|
|
|
TC06-160JFL/01,1600W AC220V Air Conditioner,For Outdoor Telecom Shelter/Room/Base Station
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
AC220V, 1600W Air Conditioner
1. Description
The AC Air Conditioner is a full automation temperature control product. It uses intelligent controller to control the whole system of the air conditioner. According to the variation of environment temperature, the intelligent controller can automatically detect, operate and record the whole system’s operating time, power consumption, event and historical data. It can store 100 event records and 1280 historical data records, and can enquire 256 days’ daily record information. The product is widely applied in telecom cabinet, small and medium sized telecom room, UPS room, outdoor base station room, etc.
2.Features
(1)Strong adaptability
(2)High intelligence
(3)High precision
(4)High reliability
(5)Low noise
(6)Low energy consumption
(7)With 4 way switching value detection
(8)With 1 way room air conditioner control
(9) Voltage input range: 220VAC±25% 50/60Hz
(10) With dry contact alarm output
3.System Principle Diagram
Diagram 1: System Principle Diagram
4.Standard Compliance
|
Standard |
Description |
|
GB/T 17626.7-1998 |
Electromagnetic compatibility |
|
GB4706.1 |
Safety of household appliance and electrical appliance with similar use. |
|
GB4798.1 |
Environmental conditions existing in the application for electric and electronic products - storage |
|
GB4798.2 |
Environmental conditions existing in the application for electric and electronic products - transportation |
|
GB4798.3 |
Environmental conditions existing in the application for electric and electronic products - usage |
5.Technical Parameters
|
Environmental Performance |
working environmental temperature |
-20°C ~ 55°C |
|
storage working temperature |
-50°C ~ 70°C |
|
|
working humidity |
≤95% |
|
|
Thermal Performance |
rated cooling capacity |
1600W(L25 L35) 1500W(L35 L35) |
|
heating input power |
300(optional) |
|
|
Electrical Performance |
rated input current |
2.15A(L25 L35) 2.35A(L35 L35) |
|
rated input power |
473W(L25 L35) 517W(L35 L35) |
|
|
input voltage |
AC220V/50Hz (187V ~ 264V) |
Diagram 2: Dimension Diagram
6.Installation and Electrical Wiring
6.1 Preparation Before Installation
(1) Prepare the tools in the following table “Installation And Maintenance Tools”.
(2)Check the air vents to ensure there’s no unnecessary items on the vents.
6.2 Installation And Maintenance Tools
|
Tools Name |
Function |
|
Cross Screwdriver |
Fix air conditioner. |
|
Small Slotted Screwdriver |
Wire power supply port on the panel |
|
Wire Stripper |
Wire stripping |
|
Wire Crimper |
Crimp power supply for equipment |
|
Multimeter |
Check the wiring to ensure it’s correctly connected and without short circuit. |
|
Clamp Meter |
Test operating current of the air conditioner |
6.3 Installation Steps
(1)Make sure the air conditioner is not connected with power.
(2)Fix the air conditioner according to the Dimension Diagram.
(3)Strip the insulation of the power supply wire, and crimp the terminal.
(4)Connect the wires according to the Electrical Wring Diagram.
(5)After finishing the wiring, use the multimeter to check if the electric circuit is normal. Then connect the air conditioner with power supply, and use clamp meter to test the operating current.
Note: Make sure to disconnect all the power supply to the air conditioner before installation. Choose proper wire diameter and test operating current according to the technical parameters of the air conditioner.
6. 4 Electrical Wiring Diagram
Diagram 3 Electrical Wiring Diagram
Wiring Ports:
L N PE : power supply port (voltage input: 220VAC±25% 50/60Hz)
A+ B- GND : communication port
AL1 AL2: general alarm output port
F+ F- : direct ventilation output port
N : not connected pin
7.After mechanical installation and electrical installation are finished, check the installation items.
(1)Make sure the air conditioner is firmly installed.
(2)Check the electrical installation circuit, and ensure it doesn’t have short circuit.
(3)Check the air outlet, air inlet, internal fan and external fan of the air conditioner, and ensure they don’t have any odds and ends.
(4)Connect the air conditioner to power supply, and test the power supply (voltage input: 220VAC±25% 50/60Hz), operating current 1A±4%.
8.System Control
8.1 Control Board
(1)Technical Parameter
a.2×16 Chinese/English shift LCD display, user friendly;
b.Simultaneously display temperature and humidity inside the box and communication room temperature;
c.Temperature measurement accuracy: 0.1 °C; humidity measurement accuracy:5%;
d.Can store 180 days’ daily event record, 1 record every day;
e.Daily highest temperature, lowest temperature, average temperature
f.Daily event record;
g.Save the former day’s daily data at 0:00 every day; Can query 180 days’ daily record information;
h.RS485 communication,RTU-Modbus protocol, support remote detection and control;
i.Controllable air conditioner quantity:2 sets. 1 set of air conditioner for communication room, and 1 set of small air conditioner for thermostatic box.
j.Control mode: pulse (Non dry contact air conditioner), conducting (dry contact air conditioner)
k.Real-time control air conditioner on/off
l.Power supply: AC85V~265V/50HZ；
m.Power consumption:≤5W；
n.Working environment: -30°C~70°C；<90%RH；
o.Installation method: guide rail,hanging;
p.Dimension(L*W*H):150mm×190mm×45mm
(2)Operating Instruction
It uses English interfaces, which can be operated easily. All the operations can be realized with four buttons. The following is the control board diagram:
Diagram 4 Control Board Diagram
8.2 Buttons
PgDn:page down button, confirm button.
Press once and release the button, page down;
A long press on the button, enter or exit parameter status;
At operating status: can select three display interfaces;
At parameter status: revise, confirm and parameter page down button; a long press on the button to exit parameter status.
▲:increasing parameter revision. Page down button for event query.
▼:decreasing parameter revision. Page up button for event query.
PgUp: page up button; the function is oppose to PgDn operation.
8.3 Operating Interfaces
The controller includes four types of working modes: operating mode, parameter mode, manual operating mode, and query mode.
(1) Operating Mode:
The mode is normal working mode. There are three operating interfaces which can be selected. The three interfaces display different content. When they are not selected, the interfaces will automatically shift. Press the button “PgDn” to select next display interface; press the button “PgUp” to select the previous display interface.
Interface 1:
Line 1: temperature and humidity inside the thermostatic box (or area I);
Line 2: box air conditioner status, real time clock;
※ ------- cooling start sign;
☼ ------- heating start sign;
♂ ------- hydrogen exhaust,/direct ventilation sign;
-- ------- compressor/ heater stop working.
Interface 2:
Line 1: temperature and humidity inside the communication room (or area II);
Line 2: cabinet air conditioner status, real time date;
※------- cabinet air conditioner start sign;
-- ------- cabinet air conditioner off sign.
Interface 3:
Circularly display current alarms;
When multiple alarms occur, it will display each alarm information circularly.
(2)Parameter Mode:
At operating status, long press on the button”PgDn” for around 3 seconds, or press the button”PgUp” at interface 1, to enter parameter mode.The first entered interface is the main menu interface, see the following diagram.
Press the button “▲”, “▼” to choose corresponding parameter group; Press ”PgDn” to enter corresponding parameter group; Press ”PgUp” to return to operating mode. The parameters selection includes:
(a) Observation Parameter (Apar Watch)
(b) Control Parameter Revision (Cpar Update)
(c) Basic Parameter Revision (Bpar Update)
(d) Manual Operation (A/M Select)
(e) Event Query (Event Query)
(f) Return To Operating Mode (Return)
(a)Observation Parameter Group (Apar):
Enter the interface to check some parameters which can’t be checked at operating mode, see “9 Parameters”.
At parameter mode: on the left of line 1 is Parameter No. (PAnn); on the right of line 1 is parameter value. Line 2 shows the remark of the parameter.
(b) Control Parameter Group (CPar):
Enter the interface to observe or revise the parameters which can be revised, see “9 Parameter”.
At parameter mode: on the left of line 1 is Parameter No. (PCnn), on the right of line 1 is parameter value. Line 2 shows the remark of the parameter.
(c) Basic Parameter Group (BPar):
Enter the interface to observe or revise the parameters which can be revised, see “9 Parameter”.
At parameter mode: on the left of line 1 is Parameter No. (PBnn), on the right of line 1 is parameter value. Line 2 shows the remark of the parameter.
(d) Manual Operation:
Enter the interface to select “Cool”, “Heater”, “Air”, “Initpar”, “Aoauto” to conduct manual start and stop operation.
(e) Event Query (Query):
Enter query mode
9. Parameters
Observation Parameters, PA00~PA13: can only be checked, and can’t be revised.
|
Parameter No. |
Parameter Name |
Initial Value |
Remark |
|
PA00 |
Vac (mains power supply voltage) |
|
V |
|
PA01 |
Icomp (compressor current feedback) |
|
fan state monitoring |
|
PA02 |
Ifan1 (inner fans current feedback) |
|
non-adjustable speed fan |
|
PA03 |
Ifan2 (outer fans current feedback) |
|
|
|
PA04 |
InFr (inner circulation fans rotation speed) |
|
adjustable speed fan |
|
PA05 |
OutFr (outer circulation fans rotation speed) |
|
|
|
PA06 |
DI1 (digital input 1) |
|
door alarm sensor |
|
PA07 |
DI2 (digital input 2) |
|
compressor pressure alarm |
|
PA08 |
DI3 (digital input 3) |
|
smoke sensor |
|
PA09 |
DI4 (digital input 4) |
|
water sensor |
|
PA10 |
ColRN (box air conditioner cooling start times) |
|
times |
|
PA11 |
ColRT (box air conditioner cooling time length) |
|
0.1hour |
|
PA12 |
HotRN (box air conditioner heating start times) |
|
times |
|
PA13 |
HotRT (box air conditioner heating time length) |
|
0.1hour |
Control Parameters, PC00~PC17:
|
Parameter No. |
Parameter Name |
Initial Value |
Remark |
|
PC00 |
LOC (password parameter) |
0 |
LOC=55, accessible to the following parameters |
|
PC01 |
colTa (box air conditioner cooling start temperature) |
25.0 |
|
|
PC02 |
colTb (cooling control return difference) |
2.0 |
|
|
PC03 |
hotTa (box air conditioner heating start temperature) |
10.0 |
|
|
PC04 |
hotTb (heating control return difference) |
5.0 |
|
|
PC05 |
ZFanTa (forced ventilation start temperature) |
35.0 |
|
|
PC06 |
ZFanTb (forced ventilation control return difference) |
2.0 |
|
|
PC07 |
TPH (inner temperature alarm upper limit) |
30.0 |
|
|
PC08 |
TPL (inner temperature alarm lower limit) |
10.0 |
|
|
PC09 |
compST (compressor status threshold) |
1.0 |
Unit: A. In case of working, when the feedback current is lower than status threshold or higher than fault threshold, it will be treated as fault and output accordingly. |
|
PC10 |
compFZ (compressor fault threshold) |
10.0 |
|
|
PC11 |
fanST (fans status threshold) |
0.25 |
|
|
PC12 |
fanFZ (fans fault threshold) |
2.0 |
|
|
PC13 |
pqTd (automatic hydrogen exhaust cycle) |
24 |
Unit: hour |
|
PC14 |
pqTi (hydrogen exhaust time length) |
5 |
Unit: minute |
|
PC15 |
Tprotect (compressor protection operation environment temperature) |
55．0 |
°C |
|
PC16 |
inFanOH (inner fans speed limit) |
100 |
|
|
PC17 |
outFanOH (outer fans speed limit) |
100 |
|
Basic Parameter, PB00~PB17:
|
Parameter No. |
Parameter Name |
Initial Value |
Remark |
|
PB00 |
LOC (password parameter) |
0 |
LOC=55, accessible to the following parameters |
|
PB01 |
inBT (inside box temperature data compensation) |
0.0 |
|
|
PB02 |
outBT (communication room temperature data compensation) |
0.0 |
|
|
PB03 |
FaultEN (fault operation definition allowed) |
Forbid |
When allowed, it can operate without feedback. |
|
PB04 |
hotDef (define heating device) |
Forbid |
|
|
PB05 |
fanDef (fan definition) |
non-adjustable speed |
Non-adjustable speed, adjustable speed, inner fan with non-adjustable speed and outer fan with adjustable speed. |
|
PB06 |
VacX (mains power supply display correction coefficient) |
1.00 |
When the display deviates from the real value, correct scale. Display Value = Real Value × Coefficient. |
|
PB07 |
IcompX (air conditioner current display correction) |
1.00 |
|
|
PB08 |
fanX (fan feedback current correction coefficient) |
1.00 |
|
|
PB09 |
ADR(address) |
1 |
|
|
PB10 |
BAUD(Baute Rate) |
9600 |
|
|
PB11 |
CESel (Select English or Chinese) |
English |
|
|
PB12 |
Year (year) |
real time |
|
|
PB13 |
Month (month) |
real time |
|
|
PB14 |
Date (day) |
real time |
|
|
PB15 |
Hour (hour) |
real time |
|
|
PB16 |
Minute (minute) |
real time |
|
|
PB17 |
Second (second) |
real time |
|
10.Wiring Diagram
Diagram 5: Wiring Diagram
11.Maintenance
Maintenance Tools:
(1)Vacuum cleaner or compressed air cleaning agent
(2)Soft brush
(3)Cross screwdriver
(4)Multimeter
(5)Clamp meter
(6)Digital thermometer
In order to keep normal temperature environment inside the cabinet, please conduct maintenance according to the “Maintenance Table”.
Maintenance Steps:
(1)Turn off the power.
(2)Disconnect the power line, and disconnect the signal line.
(3)Conduct maintenance according to the “Maintenance Table”.
(4)Connect the power line and signal line.
(5)Operating testing program.
(6)Disconnect the power, restore the normal operating status.
(7)Connect the power.
The equipment installation should reserve a maintenance space not less than 300mm.
Maintenance Table
|
Check Items |
Step Description |
Maintenance Cycle |
|
Casing |
Use brush or vacuum cleaner to clean the odds and ends on the casing. |
6 months |
|
Wiring |
Check if it gets loose and if the power supply voltage is normal. |
6 months |
|
Fans Abnormal |
Move the fans to check if the rotation is smooth, and if there’s abnormal noise or odds and ends. |
6 months |
|
Cooling Fin |
Use brush or vacuum cleaner to clean the dust on the cooling fin; use water or compressed air to clean the condenser. |
6 months |
|
Water Drainage |
Check if the water drainage pipe is smooth |
1 year |
|
Cooling/Heating |
At normal operating status, the measured temperature difference between inside and outside temperatures is higher than 10°C. |
1 year |
|
Cable |
Check if cable peeling occurs. |
1 year |
|
Communication Cable |
Check if the cable includes hidden danger such as peeling. |
1 year |
|
Grounding Cable |
Test if the equipment grounding and cabinet grounding is normally connected, and the resistance is lower than 0.1Ω. |
1 year |
Failures
|
Failure |
Analysis |
|
Air conditioner doesn’t work |
Without power input or internal power line may peel. |
|
Temperature failure alarm |
The temperature probe terminal may be loose, or the probe doesn’t work. |
|
Fans don’t rotate. |
Check if the power supply is normal, if the cables peels or fan blades are blocked by odds and ends. |
|
Fans have abnormal noise. |
fan blades are interfered by odds and ends, or fans are damaged. |
|
Can’t drain condensated water. |
The water drainage pipe is blocked. |
Contact Details
Other Products
-
Split Type Air Conditioner Rack Mounted 2500W Cooling Capacity
-
2000W Cooling Capacity Outdoor Cabinet Air Conditioner 220VAC Power Supply With 1000W Heating Capacity
-
Energy Saving Outdoor Cabinet Air Conditioner Embeded 48VDC 600W Cooling Capacity
-
3500W Cooling Capacity Split Type Air Conditioner Rack Mounted
-
1500W Cooling Capacity Outdoor Cabinet Air Conditioner 220VAC Power Supply With 1000W Heating Capacity
-
1000W Cooling Capacity Outdoor Cabinet Air Conditioner 220VAC Power Supply With 1000W Heating Capacity